Delmhorst-instrument TotalCheck Manuel d'utilisateur télécharger pdf (Page 23)

Page 23 of 32

setting for this feature is “NO”, where the backlight is completely disabled.

Backlight shutdown delays are 10, 20, 30sec. It is recommended that the

backlight delay be set to the minimum amount of time necessary in order to

maximize battery life.

 Conversions: This menu option allows the user to change the temperature scale

from Fahrenheit (default) to Celsius. You can also change the electrode type

from 4-pin (or non-insulated) or 2-pin (insulated.)

NOTE: Except for clock settings, all other parameters will return to their default

values, as indicated above, when the “RESTORE DEFAULTS” option is selected

in the Storage Menu. The values chosen for the Setup Menu parameters will

remain in effect even if the meter is turned off, and even if the battery is removed.

TAKING A READING – PRACTICAL APPLICATIONS

The following application notes are intended for use with the meter in PIN MODE.

TESTING WOOD:

The contact pins provided are best for materials up to 6/4. On materials over 6/4 or for

hardwoods over 4/4 we recommend using a remote probe such as the 26-ES ram-type

electrode. Mount the 26-ES directly to the external connector.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Pas de commentaire

Delmhorst-instrument TotalCheck Manuel d'utilisateur Page 23