Delmhorst-instrument TechScan Manuel d'utilisateur télécharger pdf (Page 4)

reference points against which subsequent readings are compared. One should not

expect that the reference scales for meters of different brands and types (resistance

/capacitance) will read alike on the same material. The benchmark may be different

from one meter type/brand to another because a given meters’ response depends

on the material used for calibration and on the meter’s range.

SWITCH KEY FUNCTIONS

1. On/Hold Key: Press to turn meter on, resume reading after checking calibration

or setting alarm, or hold current reading if pressed while reading. (There is a

slow beeping sound while holding a reading.)

2. Cal Check Key: Press and hold this key while in Read mode to check

calibration.

3. Scale Key: Press to select Wood scale or Reference scale.

1 2 3 4 5 6 7 8 9 ... 14 15

Pas de commentaire

Delmhorst-instrument TechScan Manuel d'utilisateur Page 4