Delmhorst-instrument J-2000 Manuel d'utilisateur télécharger pdf (Page 10)

PIN TALK

There are two types of contact pins - uninsulated, which were

provided with your meter, and insulated. When using uninsulated

pins, push them in to the wood to their full length, if possible.

This will give you the highest measured reading. Insulated pins

read only at the tip and can be driven to a desired depth to

gather shell and core (gradient) information. Additional types

and lengths of both the insulated and uninsulated pins are

available for specific applications.

CARE OF YOUR METER

To keep your meter in good working order:

hStore your meter in a clean, dry place. The protective

carrying case provided is an ideal storage place when the

meter is not in use.

hChange the 9-Volt battery as needed. Continued use with a

low battery may cause the meter to go out of calibration.

hChange contact pins as needed. Keep contact pins hand

tightened.

hClean the meter and contact pins with any biodegradable

cleaner. Use the cleaner sparingly and on external parts

only. Keep cleaner out of the external connector

hRemove the battery if the meter will not be used for one

month or longer.

1 2 ... 5 6 7 8 9 10 11 12 13

Pas de commentaire

Delmhorst-instrument J-2000 Manuel d'utilisateur Page 10