Delmhorst-instrument Navigator Manuel d'utilisateur télécharger pdf (Page 21)

Page 21 of 28

are 10, 20, 30sec. It is recommended that the backlight delay be set to the minimum

amount of time necessary in order to maximize battery life.

• Conversions: This menu option allows the user to change the temperature scale from

Fahrenheit (default) to Celsius. You can also change the electrode type from 4-pin (or

non-insulated) or 2-pin (insulated.)

NOTE: Except for clock settings, all other parameters will return to their default values,

as indicated above, when the “RESTORE DEFAULTS” option is selected in the Storage

Menu. The values chosen for the Setup Menu parameters will remain in effect even if the

meter is turned off, and even if the battery is removed.

• Set Pin Mode Alarm:

Refer to procedure on page 15.

TAKING A READING – PRACTICAL APPLICATIONS

The following application notes are intended for use with the meter in PIN

MODE.

TESTING WOOD:

The contact pins provided are best for materials up to 6/4. On materials over 6/4 or for

hardwoods over 4/4 we recommend using a remote probe such as the 26-ES ram-type electrode.

Mount the 26-ES directly to the external connector.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Delmhorst-instrument Navigator Manuel d'utilisateur Page 21