Delmhorst-instrument Navigator Pro Manuel d'utilisateur télécharger pdf (Page 8)

volts. This is an indication that the remaining battery life is 1-1/2 hrs of continuous “on” time.

SELECT THE GRAIN

 To change the scale, press the UP/DOWN key until the display reads “Select grain?

 Press ENTER to view the available grains. The meter will display “Change Grain to:

 Using the UP/DOWN keys to view the list of grains.

 Press Enter to select the desired grain.

Note: if you do not press the ENTER key after having reached your desired setting for

any of the above selections, the meter will remain at the previous value prior to scrolling

in either direction.

STORAGE MENU

The storage menu of the G-7 allows you to view any stored readings and display various

statistics about those readings. It also allows you to clear the memory.

TO ACCESS THE STORAGE MENU:

 Press the UP/DOWN keys until the display reads Storage Menu?

 Press ENTER

The following functions are accessed in this order by pressing the UP key. These instructions

assume that you have already accessed the Storage Menu as described above:

VIEW READINGS

After entering the storage menu, the display will immediately read “View Readings?”

 Press the ENTER key. The display will read “Select Batch:” and will list the name of one of

the grains which has stored data.

Note: If you have stored readings in “batches” for a number of different grains, you may

select the grain to view by pressing the UP/DOWN keys until the desired grain is displayed.

Then Press ENTER to select that grain. The meter will display the first reading of the

selected batch.

 Press the UP key to scroll to the next stored readings.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Delmhorst-instrument Navigator Pro Manuel d'utilisateur Page 8