Delmhorst-instrument F-2000 Manuel d'utilisateur télécharger pdf (Page 6)

CHANGE THE SET-POINT

hTo change the set-point value press the set-point key $.

The meter will display the current set-point value.

hTo scroll forward to a higher value, hold the set-point key

$ while the current value is displayed and scroll to the

set-point value desired.

hTo scroll backward through the set-point values, press and

release the set-point key

$. Within one second press and

hold the set-point decrease key

hContinue to hold the set-point decrease key

# and the

set-point value will decrease.

hWhen scrolling in either direction, release the key to stop

at your desired set-point.

If the meter reads a %MC value higher than that of the set-

point, a buzzer will sound.

INFORMATION ABOUT

YOUR READINGS

The meter will accumulate up to 100 readings in memory.

After all 100 readings are “stored” it will continue to dis-

play the number of readings, the average, and the highest as

a reminder that the memory is full. It will not add new read-

ings until the memory has been cleared.

hTo add a reading to the sum of all the previously stored

readings, release the Read key within 2 seconds. To avoid

storing a reading, keep the Read key depressed until the

electrode/prod is no longer in contact with the hay.

Readings below 6% will be displayed as .0 and readings

above 40% will be displayed as a flashing 999. Neither of

these types of readings will be added to your accumulated

readings.

F-2000 owners manualB&W_F-2000 owners manual out 1/11/13 11:31 AM Page 6

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Pas de commentaire

Delmhorst-instrument F-2000 Manuel d'utilisateur Page 6